Get 10% on any order of $150 or more.
Electric Knot Knotting Machine Fishing Hooks Tier Quick Knot Line Winder Tying Binding Tools Fishing Battery Rechargeable Type
$44.99$58.4923% off
Color: Rechargeable Type
Discount only available in
00m
:
00s
Electric Knot Knotting Machine Fishing Hooks Tier Quick Knot Line Winder Tying Binding Tools Fishing Equipment
Specification:
Battery style:
Color: Black
Speed: 125 revolutions/min
Battery used: 2X AAA battery
Dimensions: 115mm * 63mm * 28mm/4.53*2.5*1.1in
Charging style:
Color: Blue
Speed: 125 revolutions/min
Battery: 300mAh lithium battery
Charging interface: Micro USB
Dimensions: 115mm * 63mm * 28mm/4.53*2.5*1.1in
Material: ABS
Usage:
Step 1: use the wire clip to clamp the front wire disk
Step 2: The end of the front thread is facing up, and it is stuck into the left slot and also stuck at the bottom.
Step 3: face the main line of the pe line head up,stuck in the right
Step 4: Lift the net disk, tie the main line lightly with your right hand, wind it diagonally, and then turn it diagonally upwards
Step 5: Lift the spool, gently follow the main line with your left hand, wind it diagonally, and then diagonally upward
Step 5: remove the twisted wire
Step 6: smooth out the wire head pinch the front wire head and pe main line and use the pe wire head to wrap the two on a single knot
Step 7: Tighten the ends until the knot becomes tighter and darker (important)
Step 8: cut off the excess front plumb
Step 9: PE line head and main line hit a single knot fixed,cut the line head
Step 10: Complete.
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
Specification:
Battery style:
Color: Black
Speed: 125 revolutions/min
Battery used: 2X AAA battery
Dimensions: 115mm * 63mm * 28mm/4.53*2.5*1.1in
Charging style:
Color: Blue
Speed: 125 revolutions/min
Battery: 300mAh lithium battery
Charging interface: Micro USB
Dimensions: 115mm * 63mm * 28mm/4.53*2.5*1.1in
Material: ABS
Usage:
Step 1: use the wire clip to clamp the front wire disk
Step 2: The end of the front thread is facing up, and it is stuck into the left slot and also stuck at the bottom.
Step 3: face the main line of the pe line head up,stuck in the right
Step 4: Lift the net disk, tie the main line lightly with your right hand, wind it diagonally, and then turn it diagonally upwards
Step 5: Lift the spool, gently follow the main line with your left hand, wind it diagonally, and then diagonally upward
Step 5: remove the twisted wire
Step 6: smooth out the wire head pinch the front wire head and pe main line and use the pe wire head to wrap the two on a single knot
Step 7: Tighten the ends until the knot becomes tighter and darker (important)
Step 8: cut off the excess front plumb
Step 9: PE line head and main line hit a single knot fixed,cut the line head
Step 10: Complete.
Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-2cm measuring deviation due to manual measurement.
01:
1 x Fishing Line Knotter
02:
1 x Fishing Line Knotter
1 x USB Cable
1 x Fishing Line Knotter
02:
1 x Fishing Line Knotter
1 x USB Cable
.